103
3
9. TURN OFF THE POWER (SHUT DOWN)
When turning off the power of the equipment, perform the following shutdown procedure.
DO NOT turn off the power by switching off the power switch of the equipment as it can cause the failure of
the hard disk.
Before turning off the power, be sure that the following 3 conditions are satisfied.
• No jobs are left in the printing job list.
• The ERROR lamp is not blinking.
• No PCs access the equipment via network.
1
Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.
2
Press the [USER] button, and then press the [SHUTDOWN] button on
the touch panel.
3
“Processing job will be deleted. Are you sure you want to shutdown?”
appears on the screen. Press the [YES] button.
• To cancel the shutdown operation, press the [NO] button.
To Next Page
Loading...
Need help?
General
