117
4
Setting the Date and Time
The clock built in to this equipment can be set by entering the date and time using the digital keys. Also,
you can easily change the clock to and from the daylight saving system at the touch of a button.
1
Press the [GENERAL] button in the ADMIN menu.
• The GENERAL menu is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P.109
2
Press the [CLOCK] button.
• The CLOCK menu is displayed.
3
Press the [DATE/TIME] button.
• If you want to change the date format only, skip to step 10.
• When you press the [DATE/TIME] button, the DATE/TIME screen is displayed.
To Next Page
Loading...
