Toshiba E-STUDIO 351C - Setting E-Mail Functions; Setting the Scan to E-Mail Message Properties

183
4
7. SETTING E-MAIL FUNCTIONS
Setting the Scan to E-mail Message Properties
You can configure the message properties of E-mail documents that will be sent by Scan to E-mail opera-
tion.
1
Press the [E-MAIL] button.
• The E-MAIL screen is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”.  P.109
2
Press each button to enter the E-mail properties.
• [FROM ADDRESS] — Press this to enter the E-mail address of this equipment.
• [FROM NAME] — Press this to enter the identification name of this equipment.
• [BODY] — Press this to enter the body message.
You must enter the [FROM ADDRESS] button to enable Scan to E-mail.
When you press each button, the input screen is displayed. Enter the value using the keyboard and digital keys,
and press the [ENTER] button to set the entry.
3
Press the [ENTER] button.