112
3.SETTING OF BASIC COPY MODES
4.Duplex Copying (Cont.)
3
2-sided original -> 2-sided copy
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. ( P.71 “3.Bypass Copying”)
2
Place the original(s).
3
Press the simplex/duplex button on the basic menu.
4
Press the [2 -> 2 DUPLEX] button.
• Set other copy modes as required.
5
Press the [START] button.
• When placing an original on the original glass, follow steps 5 to 6 of P.65 “Placing an original on the original
glass” continuously.
To Next Page
Loading...
