Toshiba e-STUDIO 452 - Enlargement and Reduction Copying; Automatic Magnification Selection (Ams)

89
3
2. Enlargement and Reduction Copying
You can enlarge or reduce the size of copies by means of the following procedures.
• Specifying the copy paper size in advance so that the equipment will detect the original size and auto-
matically select the most appropriate reproduction ratio for the copy paper size (= automatic magnifica-
tion selection)
• Specifying both original size and copy paper size separately
• Using the zoom buttons or the one-touch zoom buttons
The enlargement/reduction ratio available differs depending on whether the originals have been set on the
original glass or on the Reversing Automatic Document Feeder (optional).
On the original glass: 25 to 400%
On the Reversing Automatic Document Feeder: 25 to 200%
Automatic Magnification Selection (AMS)
• The automatic magnification selection cannot be selected for the following originals. Set their repro-
duction ratios in other ways.
- Highly transparent originals (e.g. OHP film, tracing paper)
- Wholly dark originals or originals with dark borders
- Non-standard size originals (e.g. newspapers, magazines)
• For the original sizes available for this automatic magnification selection, see  P.56 “Acceptable orig-
inals”.
1
Place paper in the drawer(s).
2
Press the Enlargement/Reduction ([ZOOM...]) button.