23
1
Configuration of options
1. Original Cover (KA-3511PC)
Holds an original.
2. Reversing Automatic Document Feeder (MR-3018)
Automatically feeds a placed stack of originals one by one to have them copied.
3. Offset Tray (MJ-5005)
Enables copied and printed sets to be collated or stacked in groups with each set being offset.
4. Job Separator (MJ-5004)
Enables Faxes, copies and prints to be output onto separate paper trays.
5. Large Capacity Feeder (KD-1012)
This feeder enables you to feed up to 2500 sheets (80 g/m
2
) of A4 paper.
6. Paper Feed Pedestal (KD-1011)
Adds one drawer to the equipment.
7. Additional Drawer Module (MY-1021)
Enables one drawer to be added to the Paper Feed Pedestal.
8. Saddle Stitch Finisher (MJ-1024)
This finisher enables saddle stitching, in addition to sort/group finishing and stapling. (The Hole Punch
Unit sold separately can be installed to this finisher.) The Bridge Unit (KN-3520 sold separately) is
required when installing this finisher.
5 6 7
1
3 4
2
10 11
12 13
9
8
To Next Page
Loading...
