33
1
2. Turning Power On / Shutdown
Turning power on
Open the switch cover, and then turn the power switch on.
• The equipment starts warming-up. “Wait Warming Up” appears during warming-up.
• While the equipment is warming up, you can use the auto job start function.
( P.68 “Scanning the next originals during copying (Auto job start)”)
The equipment will be ready for copying after about 20 seconds and “READY” appears.
• When the use of the equipment is managed under department management or user management
function, you need to enter the department code or user information before making a copy. For details,
see P.34 “When department or user management is used”.
To Next Page
Loading...
