212
7.TEMPLATE
3.Changing Data of User Groups and Templates (Cont.)
7
10
Key in the password in “Retype Password”, and then press the
[ENTER] button to fix it.
• * (asterisk) is displayed in “Retype Password” when the password is entered.
• To correct the entered password, press the [CLEAR] button on the control panel.
11
Change the setting of “AUTOMATIC START” for recalling the tem-
plate.
• Press the [ENABLE] or [DISABLE] button.
• When [ENABLE] is selected, the icon is added to the template button. (The operation of the setting functions
is automatically started by pressing the template button with the icon when the template is recalled. How-
ever, if a password is set for the template, you need to key it in when an operation with the function set to the
template is performed, though automatic start is enabled.)
12
Press the [ENTER] button.
• The data of the template are changed.
To Next Page
Loading...
