1 TROUBLESHOOTING FOR THE HARDWARE
56 Replacing the Waste Toner Box
4
Put the cap on the opening of the waste toner box.
1) Loosen and take off the cap on the front top of the waste toner box.
2) Put the cap firmly on the opening of the waste toner box.
Never attempt to incinerate waste toner boxes.
Dispose of used toner cartridges and waste toner boxes in
accordance with local regulations.
5
Put the used waste toner box in the plastic bag and
seal it with adhesive tape.
6
Insert a new waste toner box into the slot until it
stops.
7
Close the waste toner box cover.
8
Close the covers of the finisher and Hole Punch Unit
(when it is installed) and connect the finisher to the
equipment.
Slowly move the Finisher placing your hands on the positions
shown in the figure.
Be careful not to let your fingers be caught between the
finisher and the equipment.
2
1
To Next Page
Loading...
