Toshiba E-Studio 5540c - Refilling with Staples; Refilling the Finisher Staples

1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 57
Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and Saddle Stitch
unit run out.
 P.57 “Refilling the Finisher staples”
 P.58 “Refilling the Saddle Stitch unit staples”
 Refilling the Finisher staples
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Take the empty staple case out of the staple
cartridge.
Pull up the empty staple case while pushing both sides as shown in
the figure.
4
Fit a new staple case into the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.