1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 59
1 TROUBLESHOOTING FOR THE HARDWARE
4
After the transparent cover is lifted, take the empty
staple case out of the cartridge.
5
Fit the new staple case into the staple cartridge.
Insert it to the rear until it clicks.
At this step, do not remove the seal bundling the staples.
6
Press down the transparent cover of the cartridge.
Press it down until it clicks.
7
Pull out straight the seal bundling the staples.
8
Fit the staple cartridge.
Insert the cartridge until it is caught by the latch of the staple cartridge
and is fixed with a click.
2
1
2
1
2
1
To Next Page
Loading...
