8
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
FIRMWARE UPDATING
8 - 9
(5) Select the item with the digital keys.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item.
(6) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
(7) “Update Completed.” is displayed at the bottom of the LCD screen after the updating is
completed properly.
Fig. 8-4
Item Remarks
1. OS Update Updating OS data
2. HDD SYS Update Updating Master data and System data
3. Engine Main Firmware Update Updating Engine ROM
4. Scanner Firmware Update Updating Scanner ROM
Status display during update Status display when update is completed
OS Update.......................... FROM write OS Update.......................... Completed
HDD SYS Update ............... Copy file HDD SYS Update ............... Completed
Engine Firm Update........... Flash Update Engine Firm Update........... Completed
Scanner Firm Update ..........Flash Update Scanner Firm Update ..........Completed
To Next Page
Loading...
