November 2003 © TOSHIBA TEC 10 - 1 e-STUDIO350/450 DRIVE SYSTEM
10
10. DRIVE SYSTEM
10.1 General Description
The drive system drives the drum, developer unit, cleaner unit, fuser unit, transport roller, feed roller
(upper/lower drawer and bypass unit) and registration roller.
The drive system is driven by the rotation of the main motor.
(27)
(36/21)
(22)
(25/14)
(23)
(24)
(50/27)
(72/30)
(23)
(64/30)
(33)
(47)
(25)
(28/25)
(24)
(10)
10.2 Functions
A: Drum drive........................ Drives the drum by transmitting the rotation of the main motor
through the gears to the drum flange gear.
B: Developer unit drive .......... Drives the developer unit by transmitting the rotation of the main
motor through the gears and clutch to the developer unit gears.
C: Fuser unit drive ................. Drives the fuser unit by transmitting the rotation of the main motor
through the gears to the fuser unit gears.
D: Cleaner unit drive ............. Drives the cleaner unit gear by the rotation of the drum flange gear.
E: Registration roller drive ..... Drives the registration rollers by transmitting the rotation of the
main motor through the gears and clutches.
F: Transport roller drive ......... Drives the transport roller by transmitting the rotation of the main
motor through the gears and clutches.
G: Feed roller drive ................ Drives the cassette feed roller by transmitting the rotation of the
main motor through the gears and clutches.
A: Drum drive gear
D: Cleaner unit drive gear
B: Developer unit
drive gear
C: Fuser unit drive gear
E: Registration
roller drive gear
F: Transport roller drive gear
G: Feed roller drive gear
Main motor
Drum
Fig. 10-101
To Next Page
Loading...
