November 2003 © TOSHIBA TEC 2 - 15 e-STUDIO350/450 OUTLINE OF THE MACHINE
2
Symbol
S1-5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
Name
APS1-3, APS-C, APS-R
Automatic original detection sensor
HOME-SNR
Carriage home position sensor
PLTN-SNR
Platen sensor
TNR-SW
Toner cartridge switch
USD-TNR-FLL-SNR1
Toner bag full detection sensor-1
USD-TNR-FLL-SNR2
Toner bag full detection sensor-2
ATTNR-SNR
Auto-toner sensor
TEMP/HUMI-SNR
Temperature/humidity sensor
RGST-SNR
Registration sensor
FED-U-SNR
Upper drawer feed sensor
FED-L-SNR
Lower drawer feed sensor
CST-U-TRY-SNR
Upper drawer tray-up sensor
CST-L-TRY-SNR
Lower drawer tray-up sensor
EMP-U-SNR
Upper drawer empty sensor
EMP-L-SNR
Lower drawer empty sensor
NEMP-U-SNR
Upper drawer paper stock sensor
NEMP-L-SNR
Lower drawer paper stock sensor
Function
Original size detection
Carriage home position detection
Opening/closing detection of platen
cover or RADF
Toner cartridge presence/absence
detection
Detecting if the used toner is full in the
toner bag
Detecting the presence/absence of
the toner bag
Used toner amount defection in the
toner bag
Detecting the density of toner in the
developer unit
Detecting the temperature and
humidity inside of the equipment
Detecting the paper transport at the
registration roller section
Detecting paper jam and paper
transport at upper drawer feeding
section
Detecting paper jam and paper
transport at lower drawer feeding
section
Position detection of the lifting tray of
the upper drawer
Position detection of the lifting tray of
the lower drawer
Paper presence/absence detection in
the upper drawer
Paper presence/absence detection in
the lower drawer
Paper amount detection in the upper
drawer
Paper amount detection in the lower
drawer
P-I
S1-4:P10 - I12
S-5:P10 - I13
P10 - I17
P13 - I10
P28 - I23
P12 - I28
P25 - I59
P26 - I19
P5 - I15
P19 - I11
P19 - I11
P19 - I5
P14 - I30
P14 - I30
P14 - I30
P14 - I30
P14 - I30
P14 - I30
Remarks
B-1
B-1
B-1
D-1
D-1
D-1
D-2
D-1
G
G
G
F
F
F
F
F
F
(2) Sensors and switches