Toshiba e-STUDIO557 - Page 197

e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 196
[6033] Card related error: Invalid flag data (no room-entry data)
[6034] Card related error: Invalid flag data (invalid card data)
[6037] Flags not available
[6041] Card authentication: Card related error
[6042] Card authentication: Card setting error
Check item Measures
Setting
Use a card with a valid expiration.
Classification Error item
MFP access error
The card cannot be used because no room-entry data are recorded
in it.
Check item Measures
Setting
Use a valid card.
Classification Error item
MFP access error
The card cannot be used because the data required for the use of
the card are not correctly set.
Check item Measures
Setting
Use a valid card.
Classification Error item
MFP access error
Check item Measures
Setting
Classification Error item
MFP access error Card data cannot be obtained correctly.
Check item Measures
Setting
Reattempt scanning. If the error still occurs after reattempting
scanning for several times, card data may be corrupted or the
card reader may be out of order.
Classification Error item
MFP access error The self-diagnostic code required for card authentication is not set in this
equipment correctly.