e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 22
6. File sharing related error
(When GM-1250/4180 or GM-2270 is installed)
2C31 Failed to create file File creation failure P. 8-171
2C32 Failed to delete file File deletion failure P. 8-171
2C33 Failed to create file File access failure P. 8-171
2C40 Failed to convert image file
format
Image conversion abnormality P. 8-171
2C43 Failed to process your Job.
Insufficient disk space.
Encryption error. Failed to create file. P. 8-172
2C44 Failed to convert image file
format
Encryption PDF enforced mode error P. 8-172
2C60 Failed to process your Job.
Insufficient disk space.
HDD full failure during processing P. 8-172
2C61 Failed to read AddressBook Address Book reading failure P. 8-172
2C62 Not enough memory Memory acquiring failure P. 8-171
2C63 Invalid Domain Address Terminal IP address unset P. 8-172
2C64 Invalid Domain Address Terminal mail address unset P. 8-172
2C65 Failed to connect to SMTP server SMTP address unset P. 8-172
2C66 Failed to connect to SMTP server Server time-out error P. 8-172
2C69 Failed to connect to SMTP server SMTP server connection error P. 8-172
2C6A Failed to send E-Mail message HOST NAME error (No RFC error) P. 8-172
2C6B Invalid address specified in From:
field
Terminal mail address error P. 8-173
2C6C Invalid address specified in To:
field
Destination mail address error (No RFC
error)
P. 8-173
2C6D NIC system error System error P. 8-172
2C70 SMTP service is not available SMTP client OFF P. 8-173
2C71 Failed SMTP Authentication SMTP authentication error P. 8-173
2C72 POP Before SMTP
Authentication Failed
POP before SMTP error P. 8-173
2C80 Failed to process received E-mail
job
E-mail transmission failure when
processing E-mail job received
P. 8-173
2C81 Failed to process received Fax
job
Process failure of FAX job received P. 8-173
2CC0 Job canceled Job canceling -
2CC1 Power failure occurred Power failure P. 8-173
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2D10 Illegal Job status System access abnormality P. 8-174
2D11 Not enough memory Insufficient memory P. 8-174
2D12 Illegal Job status Message reception error P. 8-174
2D13 Illegal Job status Message transmission error P. 8-174
2D14 Invalid parameter specified Invalid parameter P. 8-174
2D15 There are too many documents in
the folder. Failed in creating new
document.
Exceeding document number P. 8-174
2D20 Illegal Job status System management module access
abnormality
P. 8-174
2D21 Illegal Job status Job control module access abnormality P. 8-174
2D22 Illegal Job status Job control module access abnormality P. 8-174
2D30 Failed to create directory Directory creation failure P. 8-174
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
To Next Page
Loading...
