8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 21
4. Remote scanning related error
5. E-mail related error
(When GM-1250/4180 or GM-2270 is installed)
2BA1 Incorrect paper size A Paper size not supported in the
Electronic Filing function is being
selected.
P. 8-168
2BB0 Job canceled Job canceling -
2BB1 Power failure occurred Power failure P. 8-168
2BC0 System fatal error. Fatal failure occurred. P. 8-167
2BC1 Failed to acquire resource. System management module resource
acquiring failure
P. 8-167
2BD0 Power failure occurred during e-
Filing restoring.
Power failure occurred during restoring
of Electronic Filing
P. 8-168
2BE0 Failed to get machine parameter. Machine parameter reading failure P. 8-168
2BF0 Maximum number of pages has
been exceeded (list Maximum)
Exceeding maximum number of pages P. 8-168
2BF1 Maximum number of documents
has been exceeded (list
Maximum)
Exceeding maximum number of
documents
P. 8-168
2BF2 Maximum number of folders has
been exceeded (list Maximum)
Exceeding maximum number of folders P. 8-168
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2A20 Failed to acquire resource System management module resource
acquiring failure
P. 8-166
2A31 WS Scan function is not available Disabled WS Scan P. 8-166
2A40 System fatal error System error P. 8-166
2A50 Job canceling Job canceling P. 8-166
2A51 Power failure Power failure P. 8-166
2A60 Authentication for WS Scan failed WS Scan user authentication failure P. 8-166
2A70 Insufficient permission to execute
RemoteScan
Remote Scan privilege check error P. 8-166
2A71 Insufficient permission to execute
WS Scan
WS Scan privilege check error P. 8-166
2A72 Insufficient permission to access
e-Filing box using scan utility.
e-Filing data access privilege check error
(Scan Utility)
P. 8-166
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2C10 Illegal Job status System access abnormality P. 8-171
2C11 Not enough memory Insufficient memory P. 8-171
2C12 Illegal Job status Message reception error P. 8-171
2C13 Illegal Job status Message transmission error P. 8-171
2C14 Invalid parameter specified Invalid parameter P. 8-171
2C15 Message size exceeded limit or
maximum size
Exceeding file capacity P. 8-171
2C20 Illegal Job status System management module access
abnormality
P. 8-171
2C21 Illegal Job status Job control module access abnormality P. 8-171
2C22 Illegal Job status Job control module access abnormality P. 8-171
2C30 Failed to create directory Directory creation failure P. 8-171
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
To Next Page
Loading...
