Toshiba e-STUDIO557 - Page 50

8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 49
[E3F0] Tandem LCF transport jam (paper not reaching 3rd drawer / Tandem LCF transport
sensor)
[E260] Option LCF transport jam (paper not reaching registration sensor)
Replace parts Remarks
4th drawer transport sensor
4th drawer transport clutch
LGC board
Rollers
Classification Error item
Paper transport jam Paper not reaching 3rd drawer / Tandem LCF transport sensor
Check item Measures
Tandem LCF transport sensor • Sensor check (Perform the input check: 03-[FAX]OFF/[3]/[C])
• Connector check
• Harness check.
Tandem LCF transport clutch
(CLT9)
• Clutch check (Perform the output check: 03-231)
• Connector check
• Harness check.
LGC board • Connector check (CN350)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Tandem LCF transport sensor
Tandem LCF transport clutch
LGC board
Rollers
Classification Error item
Paper transport jam Paper which has passed the 1st drawer transport sensor does not reach
the registration sensor during the feeding at the Option LCF.
Check item Measures
Registration sensor (S18) • Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
• Connector check
• Harness check.
Intermediate transport sensor
(S17)
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.