e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 50
[E320] 3rd drawer transport jam (paper not reaching 2nd drawer transport sensor)
[E350] 4th drawer transport jam (paper not reaching 2nd drawer transport sensor)
[E3E0] Tandem LCF transport jam (paper not reaching 2nd drawer transport sensor)
Option LCF transport motor • Motor check (Perform the output check: 03-122, stop 03-172)
• Connector check
• Harness check.
Option LCF transport clutch • Clutch check (Perform the output check: 03-273)
• Connector check
• Harness check.
LGC board • Connector check (CN346)
• Board check.
LCF board • Connector check (J854)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
Intermediate transport sensor
Option LCF transport motor
Option LCF transport clutch
LGC board
LCF board
Classification Error item
Paper transport jam Paper not reaching 2nd drawer transport sensor
Check item Measures
2nd drawer transport sensor (S39) • Sensor check (Perform the input check: 03-[FAX]OFF/[2]/[C])
• Connector check
• Harness check.
Transport clutch (CLT9, 11) • Clutch check (Perform the output check: 03-210, 225, 231)
• Connector check
• Harness check.
LGC board • Connector check (CN329)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
2nd drawer transport sensor
Transport clutch
LGC board
Rollers
Check item Measures
To Next Page
Loading...
