− 260 −
5.. Top plate
1 Detachment
1) Take off the fixing screws (φ4 x 0.3" (8mm), 6 pcs)
2) Remove the top plate.
2 Attachment
1) Fix the Top plate as before.
2) Fit the screws. (φ4 x 0.3" (8mm), 6 pcs.)
6.. Coil of 2WAY-VALVE (SVS, SVSS, SVDD, SVD)
1 Detachment
1) Perform work of procedure 1. -1) (Electric parts cover) and 5. -1) (top plate).
2) Cut the binding band (1 pc) for bundling the wires of the coil (SVS, SVSS, SVDD, SVD).
3) Take off the fixing screws, remove the Coil connection plate and then remove the coil.
4) Remove the wires from the terminal (TB01,TB02) and the P.C.board (CN710).
Binding band
Screws (M4x0.24" (6mm) ,4pcs)
Heat sink (SVSS,SVD)
Screw (M4 x 0.3" (8mm) ,1pc)
Coil connection plate
Position of the screw holes
(Top plate)
E-BOX
Non-heat
insulation
The inside of
Fit the non-thermal insulation material side to the E-Box side.
Fixing screw size
SVS, SVSS, SVDD : M4 x 0.24" (6mm) (4 pcs)
SVD : M4 x 0.3" (8mm) (1 pc)
To Next Page
Loading...
