Toshiba NB100 - Top Cover; Removing the Top Cover

4 Replacement Procedures 4.5 Top Cover
4.5 Top Cover
Removing the Top Cover
Remove the top cover according to the following procedures and Figures 4-10 and 4-11.
1. Turn the computer upside down and remove the following 6 screws:
- Six M2.5x 5 black flat-head screws.
M2.5x5blackflat-head screw
Figure 4-10 Removing the screws from the bottom of the computer
2. Turn the computer right side up.
3. Remove four M2.5x 8 black flat-head screws on the top cover.
4. Disconnect the touch pad board flat cable from CN8.
5. Lift up the top cover.
4-22 TOSHIBA NB100 Maintenance Manual