Toshiba NB100 - Installing the Top Cover

4.5 Top Cover 4 Replacement Procedures
M2.5 x 8 black flat-head screw
CN8
Figure 4-11 Removing the top cover
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-10, 4-11.
1. Seat the top cover, adjusting its position.
2. Secure the top cover with four M2.5 x 8 black flat-head screws.
3. Connect the touch pad board flat cable to CN8 on the system board.
4. Turn the computer upside down and secure it with the following 6 screws:
- Six M2.5x 5 black flat-head screws.
TOSHIBA NB100 Maintenance Manual 4-23