3.2 Quick Start 3 Diagnostic Programs
When the detection is finished, the hardware components information will be displayed
as follows:
User can use function keys listed on the bottom of the screen to display the configuration
of the component or exit the current program. On the left column, the components
information is listed and user can use arrow keys or PgUp/PgDn to view the list and
highlight the chosen component. On the right column, the configuration information of
the highlighted component is listed. Press ESC to exit this program.
3.2.9 View Logs
User can enter one choice to view a log file in the screen as follows.
TOSHIBA NB100 Maintenance Manual
11
To Next Page
Loading...
