4 Replacement Procedures 4.8 Display Mask
4-32 TOSHIBA NB100 Maintenance Manual
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-17, 4-18.
1. Seat the display mask in the correct position and secure the following 21 latches, in
that order:
- Four latches under top cover.
- Four top latches
- Four latches on each of the left and right sides
- Five bottom latches
2. Secure the display mask with the following 2 screws, in that order:
- Two M2.5 x 5 black flat head screws on the top
3. Secure the following 2 seals to cover the screws, in that order:
- Two black seals on the bottom.
To Next Page
Loading...
