Toshiba NB100 - CCD Board and Speakers; Removing the CCD Board and Speakers

4 Replacement Procedures 4.10 CCD Board and Speakers
4.10 CCD Board and Speakers
Removing the CCD Board and Speakers
Remove the CCD and Speakers according to the following procedures and Figure 4-21.
1. Remove Two M2 x 2 black flat-head screws on CCD board.
2. Remove the CCD module from display rear cover.
3. Remove the right and left side Speakers
M2x2blackflat-head screw
CCD board
Speakers
Figure 4-21 Removing the CCD board and Speakers
4-36 TOSHIBA NB100 Maintenance Manual