Toshiba Portege R500 - Page 269

4.20 Display portion 4 Replacement Procedures
5. Secure the hinge portion with the following screws.
• M2.5×4C S-THIN HEAD ×2
6. Pass the wireless LAN antenna cables through the insulator.
CAUTION: Arrange the wireless LAN antenna cable of the lower left portion as shown
in the figure below.
Do not put the
cables on the rib.
Do not pinch the
cables with the
hinge.
PORTÉGÉ R500 Maintenance Manual (960-634) [CONFIDENTIAL] 4-53