4 Replacement Procedures 4.22 Touch pad/Fingerprint sensor board
4-64 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
4. Peel off the insulator.
5. Release the latches and remove the touch pad and touch pad button cover adhered
with the double-sided tape.
NOTE: Do not reuse the removed touch pad and touch pad button cover. Be sure to use
new touch pad and touch pad cover.
Figure 4-40 Removing the touch pad/fingerprint sensor board (2)
Insulator
Touch pad
Touch pad button cover
To Next Page
Loading...
