Safety Information and Precautions
Q9 Plus ASD Install/Op Manual
https://www.toshiba.com/tic/ 1
General Safety Information
DO NOT attempt to install, operate, maintain, or
dispose of this equipment until you have read and
understood all of the product safety information and
directions that are contained in this manual.
Safety Alert Symbol
The Safety Alert Symbol is comprised of an
equilateral triangle enclosing an exclamation mark.
This indicates that a potential personal injury
hazard exists.
Signal Words
Listed below are the signal words that are used
throughout this manual followed by their
descriptions and associated symbols. When the
words DANGER, WARNING, and CAUTION are
used in this manual they will be followed by
important safety information that must be carefully
adhered to.
The word
DANGER
preceded by
the safety
alert symbol indicates that an imminently
hazardous situation exists that, if not avoided or if
instructions are not followed precisely, will result in
serious injury to personnel or loss of life.
The word
WARNING
preceded by
the safety
alert symbol indicates that a potentially hazardous
situation exists that, if not avoided or if instructions
are not followed precisely, could result in serious
injury to personnel or loss of life.
The word
CAUTION
preceded by
the safety
alert symbol indicates that a potentially hazardous
situation exists that, if not avoided or if instructions
are not followed precisely, may result in minor or
moderate injury to personnel.
The word CAUTION
without the safety
alert symbol indicates
that a potentially
hazardous situation exists that, if not avoided or if
instructions are not followed precisely, may result in
equipment or property damage.
Special Symbols
To identify special hazards, other symbols may
appear in conjunction with the DANGER,
WARNING, and CAUTION signal words. These
symbols indicate areas that require special and/or
strict adherence to the procedures to prevent
serious injury to personnel or loss of life.
Electrical Hazard Symbol
A symbol that is comprised of an
equilateral triangle enclosing a lightning
bolt indicates a hazard of injury from
electrical shock or burn.
Explosion Hazard Symbol
A symbol that is comprised of an
equilateral triangle enclosing an explosion
indicates a hazard of injury from exploding parts.
Equipment Warning Labels
DO NOT attempt to install, operate, perform
maintenance, or dispose of this equipment until you
have read and understood all of the user directions
that are contained in this manual.
Warning labels that are attached to the equipment
will include an equilateral triangle enclosing an
exclamation mark. DO NOT remove or cover any of
these labels. If the labels are damaged or if
additional labels are required, contact the TIC
Customer Support Center.
Labels attached to the equipment are there to
provide useful information or to indicate an
imminently hazardous situation that may result in
serious injury, severe property and equipment
damage, or loss of life if safe procedures or
methods are not followed as outlined in this
manual.
DANGER
WARNING
CAUTION
CAUTION
To Next Page
Loading...
