No. Part name Procedure Remarks
Damper motor lead
Display unit lead
Louver motor lead
Fan motor lead
Earth-lead from
fan motor base
Pipe holder
Screws for heat
exchanger (4 pcs)
② Electrical parts <How to arrange the lead>
Box assembly Shown in the picture.
(E-box)
③ Heat exchanger 1) Take off the pipe holder.
(Refrigerant
cycle assembly)
2) Remove screws for heat exchanger.
(4 pcs)
④
Horizontal 1) Open a horizontal louver outward and
louver stretch the arm of louver base same as
the direction in the picture.
To Next Page
Loading...
