Edit Weekly timer program
To edit the program after conf rming the weekly timer setting on
Page 60
, follow steps 1 - 3 below.
1
Press .
l The day of the week and the program number of the current day will be displayed.
2
Press to select the day of the week and press to select
program number to be conf rmed.
l Resetting the operation.
3
Press to exit conf rming mode.
Deactivating WEEKLY TIMER operation
Press while “WEEKLY” is displayed on the LCD.
l The “WEEKLY” indicator will disappear from the LCD. However, the program will remain in the remote control.
l The TIMER lamp goes off.
l To reactivate the WEEKLY TIMER operation again, press
again, LCD shows the next program. The
program, after reactivation, is related to the clock time.
To Next Page
Loading...
