Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to the
“Schedule timer” screen.
Holiday setting
* Set the days of the week when the schedule timer is not used.
• Operations other than the Schedule timer, such as operations on the remote controller are available on the days set
as “Holiday”.
• Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to
the “Schedule timer” screen.
1 Push the [ MONITOR] button on the day
selection screen.
2 Push the “ Yes” [ F1] button.
The schedule of the previous day is copied.
Push the “
No” [ F2] button to
return to the “Condition setting” screen.
1 Push the [ ∧] / [ ∨] button to select
“3. Holiday setting” on the “Schedule timer”
screen.
2 Push the “ Set” [ F2] button.
3 Push the “ Day” [ F1] button to
select the day, then push the “
Set” [
F2] button to set.
Push the “ Set” [ F2] button so
that “” is displayed on the day when the
Schedule timer is not used.
4 Push the [ MENU] button.
The screen returns to the “Schedule timer”
screen.