67
EN
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
Note
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• You cannot select “Group” during the random
playback of MP3 and JPEG files.
• Chapter / Track repeat function is cancelled
whenever [SKIP H / G] is pressed.
•For some DivX
®
files, A-B Repeat playback may not
function.
• For Video CDs with PBC function, repeat play does
not work while the PBC function is on.
Random Playback
You can use this function to play back a disc randomly
instead of in the recorded order.
1 In stop mode, press [SETUP].
2 Select “CD Playback Mode” using
[U \ D], then press [ENTER/OK].
CD Playback Mode menu will appear.
3 Select “Random Play” using
[U \ D], then press [ENTER/OK].
Random playback will start.
Hint
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
screen.
• For Video CDs with PBC function, the PBC setting
will be switched to off automatically when you start
random playback.
Note
• During random playback, if you forward the track to
the end, the playback speed of the next track will be
normal.
• During random playback, you cannot use the search
function except for the search with [SKIP H / G].
By pressing [SKIP H], you can return only to the
beginning of the current track.
Programme Playback
You can programme the disc to play back in your
desired order.
1 Follow steps 1 and 2 in “Random
Playback”.
2 Select “Program Play” using
[U \ D], then press [ENTER/OK].
3 Select the desired track using
[U \ D], then press [ENTER/OK] or
[P].
4 Press [PLAY B] to start programme
playback.
Hint
• To erase tracks you selected, press [CLEAR].
• You can make up to 50 track settings.
• To cancel programme playback, press [STOP C]
twice during programme playback. “OFF” appears
on the screen.
• You may also select the desired track using
[the Number buttons] at step
3.
• For Video CDs with PBC function, the PBC setting
will be switched to off automatically when you start
programme playback.
Note
• During programme playback, if you forward the track
to the end, the playback speed of the next track will
be normal.
• During programme playback, you cannot use the
search function except for the search with
[SKIP H / G].
Slide Show
You can select the display time between 5 seconds
and 10 seconds.
1 Follow steps 1 and 2 in “Random
Playback” on this page.
2 Select “Slide Show” using [U \ D],
then press [ENTER/OK].
3 Select the display time using
[U \ D], then press [ENTER/OK].
4 Press [SETUP] to exit.
Note
• Large-size JPEG files take a few moments to be
displayed.
CDCD
VCD
VCD
(PBC OFF)
MP3MP3
JPEG
JPEG
CDCD
VCD
VCD
(PBC OFF)
CD Playback Mode
Program Play
0:00:00Total
--
-- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
JPEGJPEG
E2J70BD_EN.book Page 67 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
