104 RemotEye II User Manual – 50024-014
Multi-Machine Configuration (MMC)
The Multi-Machine Configuration (MMC) software configures and operates the Toshiba RemotEye II
Client software for multiple machines. In order to run this software, the RemotEye II Client software must
first be installed.
Installation of MMC Software
1. The software for the Multi-Machine Configuration can be located at www.toshibaups.com
and
clicking on the following paths: RemotEye II-> Download RemotEye Files-> Multiple
Configuration
2. Download the software and run the MMC_install.exe program.
3. Once installation is complete, click on MMC.exe to open the program and a window should be
displayed like the one shown below.
4.
Figure 23: MMC window
To Next Page
Loading...
