120 RemotEye II User Manual – 50024-014
11.1. Open WinSCP and select either SFTP or SCP for the file protocol, and enter the vMA IP
address/Host Name, User name, and Password. (Example: Host Name - 10.2.0.11.) Then
click the Login button. (See Figure 0-5)
Figure 0-5 WinSCP Login Screen
11.2. Locate SD_ESXi_TSB_V100.tar file (left side), then select the directory where you want it
stored on the vMA (right side) and press the F5 key. (See Figure 0-6)
To Next Page
Loading...
