RemotEye II User Manual – 50024-014 47
Output Parameters
This page shows the UPS output voltage source and readings. This page will refresh automatically at a
user-defined rate. To change or view the current refresh setting, select RemotEye II Management - HTTP
Page Refresh Rates..
Output Status
This field shows the status of the output. These readings include: Other, None, On-Line, Bypass, Battery
and Output Shutdown.
Output Voltage
This field shows the UPS output voltage in VAC.
Output Load
This field shows the UPS load as a percentage of the maximum load setting.
Output Active Power
This field shows the present UPS output active power in Watts
Output Apparent Power
This field shows the present UPS apparent power in VA
Output Power Factor (option)
This field shows the present UPS power factor.
Output Frequency
This field shows the present UPS output frequency in Hz.
To Next Page
Loading...
