46 RemotEye II User Manual – 50024-014
Input Parameters
This page shows the UPS line voltage input readings. This page will refresh automatically at a user-
defined rate. To change or view the current refresh rate setting, select RemotEye II Management - HTTP
Page Refresh Rates..
Input Voltage
This field shows the UPS input voltage in VAC.
Max. Input Voltage During Last 60 Seconds
This field shows the maximum UPS input voltage during the last 60 seconds.
Min. Input Voltage During Last 60 Seconds
This field shows the minimum UPS input voltage during the last 60 seconds.
Input Current (option)
This field shows the present UPS input current in Amps.
Input Active Power (option)
This field shows the present UPS input active power in Watts.
Input Frequency
This field shows the UPS input frequency in Hz.
To Next Page
Loading...
