Toshiba Satellite A40 Series - Accessing the SETUP Program

3 Tests and Diagnostics 3.23 SETUP
3.23.2 Accessing the SETUP Program
Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the SETUP
screen. The SETUP screen is divided into two pages.
NOTE: Panel Power On/Off item appears only when the Power-up Mode is in Resume
mode.
Internal Pointing Device = Enabled
Parallel Port Mode = ECP
Hard Disk Mode = Enhanced IDE(Normal)
PERIPHERAL
USB KB/Mouse Legacy Emulation
= Enabled
USB-FDD Le
g
ac
y
Emulation = Enabled
LEGACY EMULATION
Built-in LAN = Enabled
PCI LAN
↑↓→←: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving Home : Set default values End: Save changes and Exit
SYSTEM SETUP (2/2) ACPI BIOS version = X.XX
Built-in HDD
= Primary IDE(1F0H/IRQ14)
CD-ROM
= Secondary IDE(170H/IRQ15)
DRIVERS I/O
PCI BUS = IRQ10, IRQ11
PCI BUS
Parallel = LPT1(378H/IRQ7/CH3)
I/O PORTS
Device Config. = Setup by OS
CO
NFI
GU
RATI
O
N
Controller Mode = Auto-Selected
PC CARD
Date(M X-XXXX
Time(HH:MM:SS) = XX:XX:XX
M-DD-YY) = XX-X
SYSTEM DATE/TIME
↑↓→←: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving Home : Set default values End: Save changes and Exit
Battery Save Mode = Full Power
BATTERY
Power-up mode = Boot
CPU Cache = Enabled
Level 2 Cache = Enabled
Dynamic CPU Frequency Mode
= Dynamically Switchable
Hyper-Threading Technology = Enabled
Auto Power On = Disabled
Panel Power On/Off = Disabled
Others
Power On Display = Auto-Selected
LCD Display Stretch = Enabled
TV Type = NTSC (US)
DISPLAY
Not Registered
PASSWORD
Boot Priority = HDD→FDD→CD-ROM→LAN
HDD Priority = Built-in HDD→PC Card
Network Boot Protocol = PXE
Total = XXXXX KB
BOOT PRIORITY
SYSTEM SETUP (1/2) ACPI BIOS version = X.XX
MEMORY
3-54 Satellite A40 Maintenance Manual (960-458)