4.8 Keyboard 4 Replacement Procedures
4.8 Keyboard
CAUTION: When removing/installing the keyboard, do not touch the memory module,
boards and speakers under the keyboard. It may cause the damages to them.
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to figures 4-12 and 4-13.
1. Turn the computer face up and open the display.
2. Hold the both ends of the keyboard holder and lift it up to remove.
3. Remove the following screws securing the keyboard and keyboard hold plate. Then
remove the keyboard hold plate.
• M2.5×4B FLAT HEAD screw ×3
M2.5
×
4B FLAT HEAD
M2.5
×
4B FLAT HEAD
Keyboard holder
Keyboard hold plate
Figure 4-12 Removing the keyboard holder and keyboard hold plate
Satellite A40 Maintenance Manual (960-458) 4-23
To Next Page
Loading...
