4.21 Battery lock assembly 4 Replacement Procedures
4.21 Battery lock assembly
Removing the Battery lock assembly
To remove the battery lock assembly, follow the steps below and refer to figures 4-31.
1. Remove the following screws securing the battery lock assembly.
• M2.5×6 Tapping screw ×2
M2.5
×
6 Tapping screw
Battery lock assembly
Figure 4-31 Removing the battery lock assembly
2. Remove the battery lock assembly.
Installing the Battery lock assembly
To install the Battery lock assembly, follow the steps below and refer to figures 4-31.
1. Install the battery lock assembly and secure it with the following screws.
• M2.5×6 Tapping screw ×2
Satellite A40 Maintenance Manual (960-458) 4-53
To Next Page
Loading...
