4 Replacement Procedures 4.8 Keyboard
4. Lift the upper side of the keyboard up and turn it’s face down on the palm rest.
5. Remove the following screw and keyboard support plate.
• M2.5×6B FLAT HEAD screw ×1
6. Disconnect the keyboard cable from the connector PJ3200 on the system board, and
remove the keyboard.
M2.5
×
6B FLAT HEAD
PJ3200
Keyboard support plate
Keyboard cable
Figure 4-13 Removing the keyboard support plate
4-24 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
