3.23 SETUP 3 Tests and Diagnostics
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
Enabled Enables LEGACY support. (Default)
USB floppy disk is available without the driver.
To start the computer by FD, set this option to "Enabled"
Disabled Disables LEGACY support
15. PCI LAN
This option sets the Enable/Disable of the built-in LAN functions.
Enabled
Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.
Satellite A40 Maintenance Manual (960-458) 3-67
To Next Page
Loading...
