4.5 HDD 4 Replacement Procedures
Installing the HDD
To install the HDD, follow the steps below and refer to figures 4-4 and 4-5.
CAUTION: Do not hold the HDD by its top and bottom. It may damage the HDD.
1. Secure the HDD to the HDD bracket with the following screws.
• M3×4S FLAT HEAD screw ×4
CAUTION: Hold the HDD pack by the sides.
2. Insert the HDD pack into the slot and secure it with the following screws.
• M2.5×4B FLAT HEAD screw ×1
3. Seat the HDD cover and secure it with the following screws.
• M2.5×4B FLAT HEAD screw ×2
Satellite A40 Maintenance Manual (960-458) 4-15
To Next Page
Loading...
