4 Replacement Procedures 4.25 Hinge
4-68 Satellite A40 Maintenance Manual (960-458)
Installing the Hinge
To install the hinge, follow the steps below and refer to figures 4-37 to 4-45.
1. Install the LCD latch knob and LCD latch hook. Be careful not to lose the spring.
2. Set both the hinges on the base side and secure them with the following screws.
• M2.5×6 Tapping screw ×4
3. Secure the hinges on the display cover with the following screws.
• M2.5×4B FLAT HEAD screw ×2
• M2.5×6 Tapping screw ×2
To Next Page
Loading...
