4 Replacement Procedures 4.26 Fluorescent lamp
2. Remove the top case. Be careful not to apply excessive force to the top case or gate
TCP.
op case
Figure 4-122 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (2)
3. Remove the source PCB and gate PCB.
1) Remove the source PCB. Be careful not to apply excessive force to the PCB or
TCP when removing double-sided tape.
2) Remove the gate PCB. Be careful not to apply excessive force to the PCB or
TCP when removing double-sided tape.
Source PCB
Gate PCB
Figure 4-123 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (3)
4-128 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
