4 Replacement Procedures 4.26 Fluorescent lamp
3. Remove the source PCB and gate PCB.
1) Remove the source PCB. Be careful not to apply excessive force to the PCB or
TCP when removing the double-sided tape.
2) Remove the gate PCB. Be careful not to apply excessive force to the PCB or
TCP when removing the double-sided tape.
Source PCB
Gate PCB
Figure 4-83 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (3)
4-100 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
