4 Replacement Procedures 4.26 Fluorescent lamp
2. Install the source PCB and gate PCB.
1) Install the source PCB. Be careful not to apply excessive force to the TCP.
2) Install the gate PCB. Be careful not to apply excessive force to the TCP.
Source PCB
Gate PCB
Figure 4-86 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (6)
3. Install the top case. Be careful not to apply excessive force to the gate TCP.
Top case
Figure 4-87 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (7)
4-104 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
