4 Replacement Procedures 4.26 Fluorescent lamp
6. Turn the backlight unit (H) removed face down and remove the two screws (D) and
lamp cover (J).
NOTE: Be careful not to scratch or soil the sheets.
Screw loosening torque: 1.2kg•cm
(H) Backlight unit
(J) Lamp cover
(D) Screw
(D) Screw
Figure 4-104 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (7)
4-116 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
