4.26 Fluorescent lamp 4 Replacement Procedure
Removing the screws
1. Spread out the insulation sheet without detaching it from the side of the bezel, as
shown in Figure 4-46.
2. In the order (1) and (2) shown in Figure 4-64, remove the screws from the left- and
right-hand sides of the module.
CAUTION: To unfasten the screws, use an insert bit of point size 0 for Philips
screwdrivers.
1
1
1
1
2
2
2
2
F9402
製品 ラ ベ ル
>PC-GF13<
ＢＬ Ｓ／Ｎ ラベル
ＦＬ破棄ラベル
ＣＡＵＴ ＩＯＮラベル
FL disposal label
CAUTION label
BL S/N label
Product label
Label (cautions for disposal of FL tubes)
Figure 4-64 Replacing 14 Inch TMD fluorescent lamp (2)
Satellite A40 Maintenance Manual (960-458) 4-81
To Next Page
Loading...
