4 Replacement Procedure 4.26 Fluorescent lamp
Folding down and temporary fixing of the TAB/PCB
1. Fold down the TAB (PCB) toward the reverse side of the backlight unit, as shown in
Figure 4-71.
CAUTION: Be careful not to damage the TAB.
1
ＸＰＣＢを裏面に折り曲げ．
For the X-PCB toward the reverse side.
Figure 4-71 Replacing 14 Inch TMD fluorescent lamp (9)
4-88 Satellite A40 Maintenance Manual (960-458)
To Next Page
Loading...
