Replacement Procedures
Satellite C800 and Satellite L800
Maintenance Manual (960-Q08)
Installing the System Board
The following describes the procedure for installing the system board.
1. Put LCD cable in the right place and put MB on the top.
2. Secure the system board with the following screws.
M2.56.5 screw x3
3. Connect the Fan Cable, Power cable, Wireless Cable, RTC Cable, to the connector on
the system board.
4. Connect the speaker cable, power FFC cable, LCD cable to the system board.
Installing RTC battery
The following describes the procedure for installing the RTC battery unit
1. Connect the RTC cable to the system board and then stick the RTC battery to the system
board in the right place marked with white circle.
To Next Page
Loading...
